![]() ![]() You can also replace an existing device with a new device of the same type that was found in the search. You can display them by clicking the button Show my DALI devices. The right window lists all the devices that are currently part of the program. Select the desired device, assign a name, room and installation location and add it to the programming using the + button. This allows you to assign and name the devices correctly. If the search was completed and you select a device here, it will identify itself, as all the outputs of the device start pulsing. Start the search with "Start Search" and all connected DALI devices that are not yet part of the program will be listed: It is recommended to supply all DALI devices with power during pairing, otherwise conflicts may occur. To avoid possible address conflicts, the newly added devices must not have an assigned address yet. Available addresses are assigned to the new devices. If a DALI device is added to an existing installation, a normal search is also sufficient. If the DALI Extension is added to an existing DALI installation, a normal search is sufficient to find all DALI devices and their settings. To search for DALI devices, first click on the DALI Extension in Loxone Config, and then activate DALI Device Search.įor a new installation, the checkbox "New Installation" must be activated, this will re-adress all DALI devices during the search. The Extension starts after switching on the power supply, and the status LED will flash orange after a short time when the connection to the Miniserver is established. Also the supply of the DALI bus has to be deactivated in the properties of the DALI Extension in Loxone Config. If an external power supply is used, it is imperative that the correct polarity of the bus lines is observed. The DALI Extension is equipped with a power supply for the DALI bus. The maximum voltage drop must not exceed 2V. When using the maximum cable length, it is recommend to run DALI separate from any mains voltage cables. The maximum cable length of the DALI bus is 300m using 1.5 mm² (AWG16) conductors. The DALI Extension is installed on a DIN rail in a suitable enclosure.Ĭonnect the power supply, Link communication to the Miniserver and the DALI data lines.ĭALI bus topology can be daisy-chained, star or tree. With one DALI Extension up to 64 DALI devices in up to 16 groups can be controlled.ĭatasheet DALI Extension Table of Contents Hi- lume 1% A versatile LED driver available for any control type in applications up to 40W.The DALI Extension is designed to integrate lighting devices with DALI interface. With Soft-on, Fade-to-Black, while meeting the latest energy-efficiency standards. This driver provides quality dimming from 100%-1% Hi- lume 1% (with Soft-on, Fade-to-Black) An EcoSystem driver for downlights and troffers. ![]() ![]() Hi- lume Premier 0.1% (with Soft-on, Fade-to-Black dimming technology) An LED driver for cove and under-cabinet lighting, which offers multiple control options and superior dimming from 100%-0.1% with Soft-on, Fade-to-Black. Hi-lume LED Drivers These LED drivers are engineered and manufactured by Lutron to deliver the highest quality, performance, and reliability standards to the customer. T-Series 2-Channel Tunable White A 2-Channel tunable white LED driver that dims down to 1% and is intended for linear, pendant, and downlight fixtures used in Human Centric Lighting applications. Technical Documentation & Support Overview.Not sure who to call, or how to find something? Email us at Service Offerings ![]() Taking care of the customer is Lutron’s first principle and our number one priority.Whether you are looking to reduce energy costs, increase comfort, or manage light control solutions, Lutron products offer the flexibility you need with the energy savings you want.Ĭonnected lighting, shades, and hand-crafted controls that elevate everyday life. ![]()
0 Comments
Leave a Reply. |